Fiberglass RO/ Reverse Osmosis Machine Making Purification Filter Purifier Treatment Plant Commercial Industrial Residential System Drinking Water Purifier

Product Description

                                                                                                Image: Reverse Osmosis Flow Chart
 
1. Raw water system: level control system to adjust stop and start, single-way valve to prevent re-flux.
2. Quartz sand filter: remove turbidity, suspended matter, organic matter, colloid and so on.
3. Activated carbon filter: remove free chloride,organics,harmful matter,bad smell/color and so on.
4.  PP filter: prevent any deposition of large particles into the RO membrane.
5. High pressure pump: provide the high pressure to pump water into reverse osmosis system.
6. Reverse osmosis membrane system: capable of removing over 99% of ions, bacteria, viruses, particles.
7. Backwash system: cleaning system to prolong the service life of RO membrane.
8. Sterilization system: UV light and Ozone generator to kill organics like bacteria and viruses.
9.Chemicals system: customized adjustment system to purify different raw water types.

Product Parameter
Output Capacity	100L-1000T/H	Multi-stage filtration	Multi-stage filtration
Desalination Rate	≥99%	Filtration Accuracy	up to 0.0001
Recovery Rate	≥60%	Machine Material	SS,FRP,CS
Pipe Material	PE,PVC,PPR,SS,CS	Layout	Customized
Power	Depend on the specification	Voltage	Customized
Core Part	Filter,Membrane,Pump	Host Control System	PLC&terminal controller
Operating Temp:	3-45	Inlet pressure	0.1-0.5Mpa

Main Products

Company Profile

Company Advantage

Our Certificate

Exhibition

Packing & Delivery

FAQ

1. Turnkey Project: Core Steps and Cycles

Steps: Preliminary Investigation and Design → Procurement and Construction → Acceptance and Handover
Cycle: Small-scale (≤5,000 tons/day) 3-6 months, medium-scale 6-12 months, large-scale 12-18 months.

2. Turnkey project Acceptance Criteria and Process

Criteria: Treatment efficiency meets standards (e.g., COD removal rate ≥85%), effluent meets regulatory requirements, and 100% sludge is harmless.
Process: Self-inspection application → Document review → On-site testing → Signing of the Project Acceptance Certificate.

3. How are design changes handled?

Process: Submit change application → Technical review → Cost confirmation → Construction briefing.
Non-essential changes by the owner require a supplementary agreement.

4. What post-delivery training is provided?

Operational Level: Equipment startup and shutdown, inspections, and troubleshooting.
Management Level: Operational optimization, energy consumption control, and key compliance points.
A manual is provided, and one free refresher training session is provided during the warranty period.

5. How do I report a fault? What is the response time?

Reply: 24-hour hotline, WeChat customer service, or contact person.
Required information: Equipment model, fault symptoms, and operating data.
Response: 24-hour on-site response for routine faults, 8-12 hours for emergency faults.

6. Is there a charge for warranty repairs? Is an extended warranty available?

Free: On-site service, component replacement, and commissioning.
Replacing core components resets the warranty period, and routine repairs are covered by a 3-month warranty.

7. What types of wastewater can be treated and what are its core advantages?
Types: Domestic wastewater (activated sludge process), industrial wastewater (customized anaerobic-aerobic combined process), agricultural  wastewater (ecological technology).
Advantages: Customized solutions tailored to water quality, energy-efficient core equipment, and integration with water resource reuse.